0t i believe i have an ebay problem

[Phil-G]

sitting here at lunch i started looking around taking stock and it seems i may have over bought 15"s. 2pair 5158g hps, 1 pair 515 8gs, 1pair 411s, the 416s in my 828 cabs, and 1 pair of 420As

umm

i think a big clue is, ebay sent me a 20$ gift card.

[VolvoHeretic]

Way to try and corner the market.

[Phil-G]

the problem is getting worse

Original Altec 802 Alnico Magnet | eBay

[GM]

Implies it won't hold a proper charge...........

GM

[Phil-G]

Implies it won't hold a proper charge...........

GM

but might be just the thing for retreiving tools that might fall over board. plus i was going to experiment on them.

[Audio_by_Goodwill]

but might be just the thing for retreiving tools that might fall over board. plus i was going to experiment on them.

It won't hold much magnetism without the end plates.

I just noticed GM and I have essentially the same avatar.

[GM]

plus i was going to experiment on them.

??? Please elaborate.

GM

[Phil-G]

It won't hold much magnetism without the end plates.

i'm not so sure about that. alnicos are stand alone magnets. one of my first toys was a magnet experiment set. it came with an assortment of alnicos and ferrites. one thing i work on is marine radar sets. and the magnatrons exclusively contain alnicos. i have a few and they do come in handy sometimes.


(edit; actually one of my first toys was a cardboard box should have said "favorite")

[Audio_by_Goodwill]

i'm not so sure about that. alnicos are stand alone magnets. one of my first toys was a magnet experiment set. it came with an assortment of alnicos and ferrites. one thing i work on is marine radar sets. and the magnatrons exclusively contain alnicos. i have a few and they do come in handy sometimes.


(edit; actually one of my first toys was a cardboard box should have said "favorite")

I've always heard they need the plates, and when I took apart a speaker as a kid, the AlNiCo magent went basically dead when I removed it.

[GM]

It has to do with their shape and how its 'grain' is oriented in the molding process as well as how they are magnetized. During my brief time at Champion Slot Car Products, we switched from ready made motors and tweaked versions to a new line of uber performance motors using AlNiCo and it was a steep learning curve even with Union Carbide doing the vast majority of the design work to meet our size, performance goals.

I still have some of those magnets and trust me, even though they're too wore out to take a decent charge, they're still way more powerful than a brand new ferrite of a similar size.

GM